The following countries require the 120V version:

• American Samoa
• Anguilla
• Aruba
• Bahamas
• Barbados
• Belize (unless you have a 230V supply)
• Bermuda
• Bolivia (unless you have a 230V supply)
• Brazil (unless you have a 230V supply)
• Canada
• Cayman Islands
• Colombia
• Costa Rica
• Cuba (unless you have a 230V supply)
• Dominican Republic
• Ecuador
• El Salvador
• Guam
• Guatemala
• Haiti
• Honduras
• Japan
• Liberia
• Libya
• Mexico
• Micronesia
• Morocco (unless you have a 230V supply)
• Netherlands Antilles (unless you have a 230V supply)
• Nicaragua
• Palmyra Atoll
• Panama
• Puerto Rica
• Saudi Arabia (unless you have a 230V supply)
• Suriname
• Taiwan
• Trinidad & Tobago
• USA
• Venezuela
• Virgin Islands

All other countries require the 230V version of the Plumen 001. If in doubt, please email us at plumen@plumen.com

Ceiling Canopy:

• 3-way multi-port ceiling canopy with mounting bracket
• Comes with Wago Connector Blocks included.
• Suitable for use with all Plumen pendants, shades and bulbs. Requires an E26 or E27 Extender to be compatible with WattNott bulbs - please contact info@plumen.com for further information.
• Each port has a maximum load of 2kg
• Cord grips included
• Weight 376g
• Height 55mm
• Diameter 160mm

Spacers: 

• Bar Diameter: 7mm
• Cable to cable length: 333mm
• Material: Steel and Aluminium
• Weight (per bar): 50g
• Colours: Copper, Brass, Black, White
• Assembled External Diameter: 580mm 

Shade:

• Material: Steel
• Dimensions: 307mm x 15mm
• Weight: 700g
• Cleaning instructions: Wipe clean with a soft damp cloth and warm water. Do not use any harsh astringents or detergents.
• Product Specification Sheet available here 

Pendant:

• Fabric Cable
• Cable Length: 2 metres
• Ceiling Canopy Material: Metal
• Ceiling Canopy Diameter: 55mm

• Ceiling Canopy Height: 50mm
• Drop Cap Material: Metal
• Drop Cap Diameter: 53mm at widest point
• Drop Cap Height: 99mm
• Class 1 luminaire
• Plumen only, 15W max
• The luminaire is sold with a bulb of the energy class: A
• A rated-lamps only
• Not suitable for covering
• Dry location only
• Suitable for use indoors only
• Voltage: 100-240V 50 /60Hz
• The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
• Product Specification Sheet available here 

Light Bulb - Original 001

• Lifetime: 8,000 Hours
• Non-dimmable: Do not use in dimmers
• Colour Temperature 2700K (warm white light)
• Use in dry location only
• Not for use in totally enclosed luminaires
• Lamp dimensions: 192mm x 100mm x 91mm
• Energy Label A
• Switching Cycles: More than 30,000
• Warm-Up Time: Less than 30 seconds
• Starting time: 180ms
• Mercury Content: Less than 2.5mg
• Luminous Flux: 820 Lumen
• Lumen Maintenance: 82% after 6,000 hours
• Rated Wattage: 15W
• Lamp current: 118mA
• CRI: >80
• Power Factor: 0.59
• Product Specification Sheet available here 
• In case of breakage, please click here to ensure safe disposal.
• Once your Plumen 001 has reached the end of its lifetime, please click here to learn more about recycling information. 

Light Bulb - LED 002

• 4 Watt
• 245 Lumen
• Equivalent to 25W Incandescent Light bulb
• Lifetime: 10,000 Hours
• Dimmable: Compatible with most trailing edge dimmers. A list of tested dimmer switches is available at plumen.com/dimming
• Colour Temperature 2200K (very warm white light)
• Use in dry location only
• >5°C OPERATION
• Not for use in totally enclosed luminaires
• Lamp Dimensions: 163mm x 65mm
• Energy Class: A
• Switching Cycles: > 30,000
• Warm-Up Time: Instant Full Light
• Starting time: Instant on
• Luminous Flux: 245 Lumen
• Lumen Maintenance: > 70% after 6,000 hours
• Rated Wattage: 4W
• Power Factor: > 0.9
• Lamp current: 24mA
• CRI: > 80
• Product Specification Sheet available here