Kayan 3D Printed Lamp Shade - Formaliz3D with Plumen Bulb

$149.95
(inc. VAT) (ex. shipping)

The Kayan lamp shade is the result of an inspired collaboration between Plumen and Italian 3D printing design specialist, Formaliz3d.

Using 3D modelling and printing, Kayan is specially designed to fit the smaller Plumen models.

Its powerful simplicity of soft, sinuous shapes perfectly complements the curved silhouettes of the bulbs. The punctured sides also let the bulb’s unique silhouette shine through whilst keeping the full brightness of the light projected onto surfaces below. 

The shade comes included with either a Baby Plumen 001 or an Original Plumen 002.

read more

Shade

  • Shade Material: ABS plastic
  • Dimensions: 220mm x 150mm x 150mm
  • Fabric Cable
  • Cable length: 1.20m 

Baby Plumen 001

  • Screw Cap E27
  • Lifetime of 8,000 Hours
  • 9 Watt
  • 505 Lumen
  • Colour Temperature 2700K (warm white light)
  • Non-Dimmable: Do not use with dimmers, motion sensors or other control devices

Original Plumen 002

    • Screw Cap E27
    • Lifetime of 8,000 hours
    • 6 Watt
    • 245 Lumen
    • Colour Temperature 2500K (very warm white light)
    • Non-Dimmable: Do not use with dimmers, motion sensors or other control devices
  • North America, Japan and certain other countries are compatible only with the 120V version.  Most other countries are compatible only with the 230V (E27) version. For a list of the requirements of each country in the world, please click the 'Country Compatibility' tab. The 120V (E26) version is sold on the US shop.
  • For a full list of technical specifications please click on the tab "Full specification".

The Kayan is sold with the 230V version only (E27).

The following countries require the 120V version:

  • American Samoa
  • Anguilla
  • Aruba
  • Bahamas
  • Barbados
  • Belize (unless you have a 230V supply)
  • Bermuda
  • Bolivia (unless you have a 230V supply)
  • Brazil (unless you have a 230V supply)
  • Canada
  • Cayman Islands
  • Colombia
  • Costa Rica
  • Cuba (unless you have a 230V supply)
  • Dominican Republic
  • Ecuador
  • El Salvador
  • Guam
  • Guatemala
  • Haiti
  • Honduras
  • Japan
  • Liberia
  • Libya
  • Mexico
  • Micronesia
  • Morocco (unless you have a 230V supply)
  • Netherlands Antilles (unless you have a 230V supply)
  • Nicaragua
  • Palmyra Atoll
  • Panama
  • Puerto Rica
  • Saudi Arabia (unless you have a 230V supply)
  • Suriname
  • Taiwan
  • Trinidad & Tobago
  • USA
  • Venezuela
  • Virgin Islands

All other countries require the 230V version of the bulb. If in doubt, please email us at plumen@plumen.com

Shade

  • Shade Material: ABS plastic
  • Dimensions: 220mm x 150mm x 150mm
  • Cable length: 1.20m 
  • Product codes:  kay_baby001_blackwhite / kay_baby001_red / kay_002_blackwhite /kay_002_red
  • Plumen bulb only, 11W max

Baby Plumen 001

  • 9 Watt
  • 505 Lumen
  • Screw Cap (E27)
  • Equivalent to 40 W Incandescent Light bulb
  • Lifetime: 8,000 Hours
  • Non-Dimmable: Do not use with dimmers
  • Colour Temperature: 2,700K (warm white light)
  • Risk of electric shock – use in dry location only
  • Not for use in totally enclosed luminaires
  • Lamp Dimensions: 158mm x 74mm x 70mm
  • Energy Label A
  • Switching Cycles: More than 30,000
  • Warm-Up Time: Less than 30 seconds
  • Starting time: 180ms
  • Mercury Content: Less than 2.5mg
  • Luminous Flux: 505 Lumen
  • Power Factor: Greater Than 50
  • Lumen Maintenance: 75% after 6,000 hours
  • Rated Wattage: 8.8W
  • Lamp current: 62mA
  • CRI: 83
  • Power Factor: 0.57
  • Product Specification Sheet available here 

Original Plumen 002

  • 6 Watt
  • 245 Lumen
  • Screw Cap (E27)
  • Equivalent to 25 W Incandescent Light bulb
  • Lifetime: 8,000 Hours
  • Non-dimmable
  • Colour Temperature: 2,500K (very warm white light)
  • Risk of electric shock - use in dry location only
  • >5° operation
  • Not for use in totally enclosed luminaires
  • Lamp Dimensions: 163mm x 65mm
  • Energy Class: A
  • Switching Cycles: More than 30,000
  • Warm-Up Time: Less than 30 seconds
  • Starting time: 180ms
  • Mercury Content: Less than 2.5mg
  • Luminous Flux: 245 Lumen
  • Lumen Maintenance: 70% after 6,000 hours
  • Rated wattage: 6W
  • Lamp current: 48mA
  • CRI: 80+
  • Power factor: >0.55
  • Product Specification Sheet available here
  • If the bulb breaks, please click here to find out how best to clean it up.
  • For the best way to dispose of the bulb at the end of its lifetime, please click here
read more