Ruche 3D printed shade with Plumen 001

$270.00
(inc. VAT) (ex. shipping)

Currently unavailable

The Ruche 3D printed shade with Plumen 001 is not compatible with 120V (US). A 230V version is available from our UK shop.

Using 3D modelling and printing, Ruche shades are made up of repeating strips that flow from youthful tips to mature, fanned out fins. These fins cut across each other in an impossible configuration that still, to the eye, feel harmonious and natural. Slips of light escape like rays of sun through trees, while the open base allows the brightness of the bulb to fully illuminate the surface below.

The shades are printed in a 300 micron layer height. These larger layers add a pleasing organic texture that you can see in the close-up image.

Ruche lamp shades are a result of an inspired collaboration between Plumen and designer and engineer, Hook Phanthasuporn.

The shade and pendant set comes with a Plumen 001 light bulb included.

 

read more

Shade

  • Shade Material: PLA
  • Dimensions: 298.6mm x 167mm
  • Fabric Cable with Ceiling Rose
  • Cable length: 2m Standard

Original Plumen 001

  • Fitting: E27
  • Lifetime: 8,000 Hours
  • 15 Watt
  • 820 Lumen
  • Colour Temperature: 2700K (warm white light)
  • Non-Dimmable: Do not use with dimmers, motion sensors or other control devices
    • This pendant set is compatible with 230V (E27). North America, Japan and certain other countries are compatible only with the 120V version.  Most other countries are compatible only with the 230V (E27) version. For a list of the requirements of each country in the world, please click the 'Country Compatibility' tab. The 120V (E26) version is sold on the US shop.
    • For a full list of technical specifications please click on the tab "Full specification".

     

    This pendant set is compatible with 230V (E27).  

    North America, Japan and certain other countries are compatible only with the 120V version.  Most other countries, including the UK are compatible only with the 230V (E27) version.

    The following countries require the 120V version which means the set is not compatible:

    • American Samoa
    • Anguilla
    • Aruba
    • Bahamas
    • Barbados
    • Belize (unless you have a 230V supply)
    • Bermuda
    • Bolivia (unless you have a 230V supply)
    • Brazil (unless you have a 230V supply)
    • Canada
    • Cayman Islands
    • Colombia
    • Costa Rica
    • Cuba (unless you have a 230V supply)
    • Dominican Republic
    • Ecuador
    • El Salvador
    • Guam
    • Guatemala
    • Haiti
    • Honduras
    • Japan
    • Liberia
    • Libya
    • Mexico
    • Micronesia
    • Morocco (unless you have a 230V supply)
    • Netherlands Antilles (unless you have a 230V supply)
    • Nicaragua
    • Palmyra Atoll
    • Panama
    • Puerto Rica
    • Saudi Arabia (unless you have a 230V supply)
    • Suriname
    • Taiwan
    • Trinidad & Tobago
    • USA
    • Venezuela
    • Virgin Islands

    All other countries require the 230V version of the bulb. If in doubt, please email us at plumen@plumen.com

    Shade

    • Shade Material: PLA
    • Dimensions: 298.6mm x 167mm
    • Fabric cable with Ceiling Rose
    • Cable length: 2m Standard 

      Original Plumen 001

      • Lifetime: 8,000 Hours
      • Non-dimmable: Do not use in dimmers
      • Colour Temperature 2700K (warm white light)
      • Use in dry location only
      • Not for use in totally enclosed luminaires
      • Lamp dimensions: 192mm x 100mm x 91mm
      • Energy Label A
      • Switching Cycles: More than 30,000
      • Warm-Up Time: Less than 30 seconds
      • Starting time: 180ms
      • Mercury Content: Less than 2.5mg
      • Luminous Flux: 820 Lumen
      • Lumen Maintenance: 82% after 6,000 hours
      • Rated Wattage: 15W
      • Lamp current: 118mA
      • CRI: >80
      • Power Factor: 0.59
      • If the Original Plumen 001 breaks, please click here to find out how best to clean it up
      • For the best way to dispose of the Original Plumen 001 at the end of its lifetime, please click here

       

      read more