Ruche 3D Printed Shade with Plumen 002

$240.00
(inc. VAT) (ex. shipping)

Currently unavailable

Unfortunately, this shade is not compatible with 120V (US). You can purchase a 230V version from our UK site.

Using 3D modelling and printing, Ruche shades are made up of repeating strips that flow from youthful tips to mature, fanned out fins. These fins cut across each other in an impossible configuration that still, to the eye, feel harmonious and natural. Slips of light escape like rays of sun through trees, while the open base allows the brightness of the bulb to fully illuminate the surface below.

The shades are printed in a 300 micron layer height. These larger layers add a pleasing organic texture that you can see in the close-up image.

Ruche lamp shades are a result of an inspired collaboration between Plumen and designer and engineer, Hook Phanthasuporn.

The shade and pendant set comes with a Plumen 002 light bulb included.

Shade

  • Shade Material: PLA
  • Dimensions: 246.2mm x 124mm
  • Fabric Cable with Ceiling Rose
  • Cable length: 2m Standard  

Original Plumen 002 LED

  • 4 Watt
  • 245 Lumen
  • Equivalent to 25W Incandescent Light bulb
  • Lifetime: 10,000 Hours
  • Dimmable: Compatible with most trailing edge dimmers. A list of tested dimmer switches is available at plumen.com/dimming
  • Colour Temperature 2200K (very warm white light)
    • This pendant set is compatible with 230V (E27). North America, Japan and certain other countries are compatible only with the 120V version.  Most other countries are compatible only with the 230V (E27) version. For a list of the requirements of each country in the world, please click the 'Country Compatibility' tab. 
    • For a full list of technical specifications please click on the tab "Full specification".
    read more

     

    This pendant set is only compatible with 230V (E27). 

    North America, Japan and certain other countries are compatible only with the 120V version.  Most other countries, including the UK are compatible only with the 230V (E27) version.

    The following countries require the 120V version which means the set is not compatible:

    • American Samoa
    • Anguilla
    • Aruba
    • Bahamas
    • Barbados
    • Belize (unless you have a 230V supply)
    • Bermuda
    • Bolivia (unless you have a 230V supply)
    • Brazil (unless you have a 230V supply)
    • Canada
    • Cayman Islands
    • Colombia
    • Costa Rica
    • Cuba (unless you have a 230V supply)
    • Dominican Republic
    • Ecuador
    • El Salvador
    • Guam
    • Guatemala
    • Haiti
    • Honduras
    • Japan
    • Liberia
    • Libya
    • Mexico
    • Micronesia
    • Morocco (unless you have a 230V supply)
    • Netherlands Antilles (unless you have a 230V supply)
    • Nicaragua
    • Palmyra Atoll
    • Panama
    • Puerto Rica
    • Saudi Arabia (unless you have a 230V supply)
    • Suriname
    • Taiwan
    • Trinidad & Tobago
    • USA
    • Venezuela
    • Virgin Islands

    All other countries require the 230V version of the bulb. If in doubt, please email us at plumen@plumen.com

    Shade

    • Shade Material: PLA
    • Dimensions: 246.2mm x 124mm
    • Fabric Cable with Ceiling Rose
    • Cable length: 2m Standard 

    Original Plumen 002 LED

    • 4 Watt
    • 245 Lumen
    • Equivalent to 25W Incandescent Light bulb
    • Lifetime: 10,000 Hours
    • Dimmable: Compatible with most trailing edge dimmers. A list of tested dimmer switches is available at plumen.com/dimming
    • Colour Temperature 2200K (very warm white light)
    • Use in dry location only
    • >5°C OPERATION
    • Not for use in totally enclosed luminaires
    • Lamp Dimensions: 163mm x 65mm
    • Energy Class: A
    • Switching Cycles: > 30,000
    • Warm-Up Time: Instant Full Light
    • Starting time: Instant on
    • Luminous Flux: 245 Lumen
    • Lumen Maintenance: > 70% after 6,000 hours
    • Rated Wattage: 4W
    • Power Factor: > 0.9
    • Lamp current: 24mA
    • CRI: > 80
    • Once your Plumen 002 has reached the end of its lifetime, please click here to learn more about recycling information.
      read more